#ARCHICAD 18 MATERIAL HOW TO#

In place of the ARCHICAD 14, we have a Connect menu that describes various things that you can do with trimming things to roofs. ItвЂ™s been changed to Crop to Roof, and in fact, itвЂ™s not showing up in the standard ARCHICAD 16 menus. The command under the design menu that used to be called Trim to Roof is no longer there. IвЂ™ll take these four walls, select them all, change them to be higher than the roof, and letвЂ™s take a look. Now, weвЂ™ll go to 3D, and weвЂ™ll start seeing the first changes that we will encounter. Just choose the slope, the 4 in 12, go here, and find a pivot line the direction of upward sloping, and then select that roof after drawing it and use the pet palette option to make it a little larger to have an overhang. So, IвЂ™m picking a single-plane roof and a rectangle, and it will be very much the same. Now, in order to create that shed roof, IвЂ™ll go to the new geometry option, which is a single-plane roof as compared to a multi-plane roof. Now that IвЂ™ve created a copy of the walls, letвЂ™s start drawing the first roof, which will be a shed roof in this corner. IвЂ™m just going to have to manually change that one down to start at the ground level so that weвЂ™re starting from the same point. Now, there is one individual one that was used for the box gable. For example, this wall here, deselect it, then reselect it, and what that will do is that will actually then show the last value selected, and now when I make the change, it will affect all the ones that need to be adjusted here. ThatвЂ™s because some of them are at that height, but what I can do is I can select any one of them thatвЂ™s not. Now, you notice when I selected all the walls that they actually say that theyвЂ™re all at the same height. What I want to do is bring them down all to the same size so I can start out sort of nice and neutral. Nice, even distance, and then weвЂ™ll go up and take a look at them in 3D, and you can see that the walls are actually varying sizes. So, what IвЂ™ll do is take the walls that IвЂ™ve already got here, go to the wall tool with the Marquee active, and select all the walls and drag a copy of these over.

#ARCHICAD 18 MATERIAL HOW TO#

ItвЂ™s important to understand how to take advantage of whatвЂ™s there as well as how to avoid some of the surprising little areas that can be confusing. Some of them make these roof creations easier, and others actually have surprising complications. However, there are some new options that were introduced into ARCHICAD 15. YouвЂ™ll see that the roofs all came through just fine, so you can actually bring files forward, and you can create roofs that are very similar in ARCHICAD 15 and later. IвЂ™m working here in ARCHICAD 16, and IвЂ™ve opened up the file from ARCHICAD 14. In this lesson, weвЂ™ll look at the creation of roofs in ARCHICAD 15 and 16. How to Model Roofs in ARCHICAD вЂ“ In Depth Tutorial For A Wide Variety of Roof Types

Archicad 18 material